Prop your piece up on stands and make sure it’s level.
To determine how much you’ll need, use our resin coverage calculator at ArtResin.com/calculator. With gloves on, pour by volume precisely equal amounts of room temperature resin and hardener into a mixing container.
Stir thoroughly for at least 3 full minutes, scraping the sides and bottom as you stir to ensure that the entire mixture will properly catalyze and therefore cure as expected. You’ll have about 45 minutes of working time.
4. POUR + SPREAD
Pour and spread as you see fit. ArtResin is self-leveling. You can coat the sides with a gloved hand or disposable brush, or just let it dome neatly on top.
Bubbles will begin to rise to the surface. We recommend using our Artist’s Torch to pop bubbles for a flawless finish. Pick out any hairs or dust particles with a toothpick.
Cover your piece to protect it from dust and let it sit overnight. In about 24 hours, your piece will be hard to the touch. After 72 hours it will be fully cured.
7. CLEAN UP
To reuse your mixing tools, wipe them down with paper towel before the resin dries. If necessary clean skin with soap and water.