How To Use Bulk Epoxy Resin

ArtResin's 10 Gallon Pro Bulk Kit is exactly what you need - bulk resin at bulk savings! Check out our easy steps to learn how to set up YOUR kit like a pro!

High fives, you did it!
You ordered ArtResin's 10 Gallon Pro Bulk Kit - the kit for SERIOUS resin addicts! 

We know you CAN'T WAIT to get creative but do us a favor and check out this quick video on how to set up your 10 Gallon Pro Bulk Kit correctly. Our awesome Production Facilities Manager Daniel Hayes is here to show you exactly how the pros do it!

Here's how to go from your front door to your first pour ... in 5 easy steps!

STEP 1: Unbox your 10 Gallon Pro Bulk Kit.

Set it on your desired work surface right side up, like this ....

 
TIP: Make sure your work surface is strong enough to support the weight of the containers - they're heavy, about 40lbs each!  You also need to ensure your work surface is wide enough so that when you're ready to pour, you're able to sit your containers on their sides, like this .... 

STEP 2: Remove the plug from the cap, using an adjustable wrench.

STEP 3: Firmly screw in the spigot supplied.

STEP 4: Make a Vent Hole

Next, you'll need to make a vent hole - this allows air to pass through so that your ArtResin flows easily out of the spigot.
Unscrew the cap covering the vent hole.
Insert a nail into the recessed area and give it a light tap or two with a hammer to open up the vent hole.
( By the way ... don't you just love our ArtResin pink hammer? )

STEP 5: Place the container on its side

Set the container on its side to pour.

IMPORTANT: Once you've finished pouring and have turned off the spigot, please remember to turn the container back right side up to avoid any unwanted drips!!

TIP: Always keep disposable gloves, paper towels and rubbing alcohol handy to clean up :) As careful as we might be, accidents and drips happen to us all.

Here are a couple of things that we find helpful:

• Wear disposable gloves to prevent sticky fingers!
• Lay a vinyl shower curtain over your work surface, and on the floor directly under your spigot. Allow any resin spills or drips to dry and just peel them right off!
• Fill a spray bottle with rubbing alcohol. Spray it on paper towel to wipe up drips, sticky surfaces and to wipe off your spigot once your done pouring.  

IMPORTANT: Don't use rubbing alcohol to clean your hands. 

Rubbing alcohol is great at breaking down epoxy resin, yes, but it also enables your skin to absorb it - and you don't want that! Save it for cleaning your tools and work surface, but keep it well away from your bare skin when working with resin.  

Click here to see a video Dave made all about how to clean your sticky resin hands safely and effectively!





There you have it!
How to set up your 10 Gallon Pro Bulk Kit and some handy tips that will have you pouring like a pro in no time!!

Check out our blog: How Much Epoxy Resin Do You Need?

Do you want to learn more about using ArtResin epoxy resin? Read our guides below and get informed:

• How To Use ArtResin
• How To Apply Epoxy Resin
• Can I Use Epoxy Resin On Fabric
• Can I Use Epoxy Resin As A Glue
• What Materials Can I Use Epoxy Resin On
• Why Should I Use Support Blocks When Using Epoxy Resin
• Can I use Epoxy Resin Over Paper?
• Can I Embded Objects In Clear Resin?
• Can You Put Epoxy Resin On Polymer Clay?
• Can I Use ArtResin To Make Coasters & Hotplates?
• Can I use Epoxy Resin Over Organic Material Natural Objects?