How to Create Petri Dish ArtPosted on 20 Mar 13:11
The iconic "petri dish art" style is made by encapsulating alcohol ink in ArtResin within a reusable silicone mold. The ink meanders through the resin creating vibrant ribbons and colorful "petrified" squiggles. It looks SO impressive, yet it's easy to do and super fun to make!
Check out our video demo below!!
The Petri Dish Art Kit comes with the three primary colors (cyan, yellow and magenta) + white. If you prefer not to mix up your own unique hues, we also offer a full 8-color set of ArtResin-brand alcohol inks for your creative pleasure! All our alcohol inks are fully compatible with ArtResin epoxy resin.
The kit includes:
- 8 oz ArtResin™ epoxy resin
- ArtResin™ Alcohol Ink in Yellow, Cyan & Magenta (14.79 ml/0.5 fl oz bottles)
- ArtResin™ Ink Sinker (14.79 ml/0.5 fl oz bottle)
- 1 reusable silicone mold
- 1 measuring cup
- 1 mixing stick
- 1 pair of disposable gloves
- 4 display stands
And detailed instructions to guide you through the process!
Start by placing your closed resin and hardener bottles in a warm water bath for about 10 minutes. When they are nice and warm, take them out of the bath and measure equal parts resin and hardener into your mixing cup.
Note: The bottles in the pic below are our 16 oz kit (8 oz resin + 8 oz hardener).
You will need about 3 oz for each 4” coaster (That’s 1.5 oz of hardener, and 1.5 oz of resin). Gently stir your mixture for at least 3 minutes. Try to stir carefully so that you don’t end up with a lot of bubbles.
Once your resin and hardener are thoroughly combined, pour the mixture into your silicone mold. Fill up each mold about half way.
Now for the fun part! Using the alcohol ink, drop your favourite colors directly from the bottle into your resin.
After using the color, drop the white Alcohol Ink Sinker over each of your color drops. Keep alternating between color and Ink Sinker until you're happy with your creation!
💡 TIP: It’s helpful to use about 2 drops of color to 1 drop of ink sinker. This helps the color to sink through the resin properly. Also, you’ll want to use up to 45 drops in total for each 4” mold so as to allow the resin to properly catalyze.
That’s it! Once you’ve dropped your ink in, cover your mold and leave it to cure overnight (between 12 – 24 hours).
The next day, you can remove your cured petri dish art from the silicone mold and see how they turned out!
How to get funky!
Now that you know the basic steps, here are some ways you can change it up to get different effects:
Ink Sinker First
Instead of dropping in the alcohol ink colors and then the Ink Sinker, try dropping in the Ink Sinker first with the colors on top, for a slightly different look.
No Ink Sinker
If you like the way the colors float on top of the resin, try not adding any Ink Sinker at all!
Premix your ink
To create pastel colors, or to get rid of any white spots, you can pre-mix your alcohol ink and Ink Sinker.
To do this, combine a few drops of Ink Sinker with a few drops of color (you can play around with the ratio of color to Ink Sinker; usually equal parts works well). Shake up your mixture and drop it directly into your mold.
Let your epoxy begin to set
If you don’t want your ink to spread too much, pour your mixed ArtResin into your silicone mold and wait 20-30 minutes before dropping in your ink. Oppositely, if you want your ink to spread a lot, drop it into your resin as soon as it’s mixed.
The best and final tip:
There are SO many different ways to create interesting effects with alcohol ink and resin! Why not play around with different techniques and see what you can come up with?
Let us know your favourite way to create petri dish art in the comments!
Alcohol Ink on Yupo Paper
You can also use ArtResin Alcohol ink on Yupo paper. Yupo paper is a plastic-based paper that allows the alcohol ink to ‘float’ over the surface. You can drip, paint, or sponge the ink onto the paper. The ink is incredibly vivid, and it moves and mixes over the paper beautifully.
To elevate your ink on paper artwork, try mounting your work onto a wooden panel and protecting it with a layer of ArtResin. The resin really gives the colors an extra punch!
You can also play around with collage, layering Yupo paper with ArtResin.
There you have it—so many fun options to try with ArtResin and Alcohol Ink. Experiment and above all, enjoy!!
Show us your alcohol ink art! Tag your work @art_resin on instagram!