How To Use Epoxy Resin

Posted on 24 Oct 18:54

Have you ever wished that a resin artist could show you exactly how to apply ArtResin epoxy resin, step by step?

Good news, friends! 
ArtResin's co-founder Rebecca is here to show us how to get the perfect pour, in 7 quick and easy steps!

Welcome to our brand new series, ArtResin 101 - it's the ultimate guide on how to use ArtResin!  It's kind of like, "ArtResin for dummies" except that doesn't sound very nice, so we'll just say "ArtResin for intelligent people who are being brave and trying something new and unfamiliar". LOL!

In this series, ArtResin's co-founder Rebecca shares her best practices, tips and tricks to help you get a flawless finish.

For those who can't wait to get started and just want a quick walk-through, this is the video for you ... ArtResin 101 - In Short

And for those of you who are more detail oriented, who want to see everything from p
rep to clean up with nothing glossed over (ha.. no pun intended) ... then you're going to LOVE our full length version: ArtResin 101: How To ArtResin Step By Step

And for those of you who prefer the written word, we haven't forgotten about you! :)
Here's how to ArtResin - in 7 easy steps!


So, you've heard the expression, "it's all in the prep work" ...
Well, this is true for epoxy resin too!
Getting your work surface, artwork and tools ready to go means you won't lose precious working time trying to find what you need.
To get started with ArtResin, the first step is to prep your work space and your artwork.

Here's how:

- a few garbage bags or a large, clear, vinyl shower curtain
- stands to prop up your piece ( use pyramid stands or even large lego blocks )
- painter's tape
- a level
- a measuring cup
- a mixing container
- a mixing stick
- a spreader
- a disposable brush
- a pair of disposable gloves
- toothpicks to fish out bits of dust or hair
- an Artist's Studio Torch
- ArtResin epoxy resin
- your artwork
- a box big enough to cover your artwork

Make sure your work is completely dry and free of any dust or debris before applying ArtResin

If your work is on a large canvas, you'll want to reinforce it at the back with some cardboard. Resin can be heavy so reinforcing the back will prevent the canvas from sagging and prevent the resin from pooling in the centre.

If your artwork involves ink, paper, or anything that has the potential to bleed or absorb wet ArtResin, we always recommend erring on the side of caution and pre-sealing your piece with an appropriate sealant.

If you plan to resin the sides of your artwork, tape off the bottom of your artwork with painter's tape to catch any drips.  If you plan to allow the ArtResin to dome i.e. sit neatly on top of your artwork without going over the sides, you can tape off your edges for a little extra insurance :)

Lay out a few garbage bags, or a clear vinyl shower curtain over your work surface.
Next, prop your piece up on stands and make sure it's level. 


Determine how much ArtResin epoxy resin you'll need using our online Resin Calculator

With gloves on, pour ( by volume ) precisely equal amounts of room temperature resin and hardener into a mixing container. 

👉 TIP - the ideal working temperature for working with ArtResin is 75-85 F or 24-30 C

3. MIX

Stir your equal amounts of resin and hardener mixture thoroughly, for at least 3 whole minutes, making sure to scrape the bottoms and sides as you go.

👉TIP - Scraping the sides and bottom is essential and ensures that everything in your mixing vessel catalyzes and that no unmixed resin or hardener is left stuck to the sides. If unmixed resin or hardener is stuck to the sides and gets poured out onto your artwork, you could end up with soft wet spots or sticky resin! This is also why we don't recommend scraping the sides and bottom of your mixing vessel when you pour your ArtResin onto your artwork ( like you normally would if say, you were scraping a mixing bowl of cake batter into a cake pan ).  

Remember ... scrape when you stir, not when you pour!


Now's the fun part!! 

You'll have about 45 minutes of working time to spread your ArtResin before it starts to cure and gets too thick to work with.

Starting in the center, pour your ArtResin onto your artwork.
Use a plastic spreader to spread your ArtResin to the edges - we love the reusable spreaders in our Accessory Kit!

👉TIP - You can spread your ArtResin right over the edges, using a gloved finger to wipe off any excess resin.  Or for a real pro finish, try doming your ArtResin, which is just nudging your ArtResin right to the edge of your piece without going over, allowing it to sit neatly on top of your artwork.


We highly recommend using a torch to pop bubbles for a flawless finish - nothing beats a flame for really zapping out bubbles!  For small pieces, we love our handheld butane-fuelled Artist's Studio Torch.  For larger pieces, our Artist's Propane Torch Head can't be beat!

Look at your artwork at eye level under a good light source so you can spot any missed bubbles or stray bits of dust or hair.  We love keeping toothpicks handy for this purpose!


Cover the piece with a box to fit your artwork and wait.
In about 24 hours, your piece will be hard to the touch. After 72 hours, it will be fully cured and ready to display!


High fives! The creative part is done.
While your artwork is drying and everything looks awesome, don't forget the last important step ... cleaning up!

Wipe down your tools, mixing jug and measuring cups promptly after use with paper towels. Spritz with rubbing or denatured alcohol and wipe your tools down again for a final clean.

If necessary, wash skin promptly using soap and water. 

💡TIP - Do NOT use rubbing alcohol to remove ArtResin from your skin. Alcohol breaks down ArtResin, yes, but it also allows your skin to absorb it! Save the alcohol for your tools and use soap and water for your skin. By the way, soap and water WILL work for your tools too...

If you've taped off the underside of your piece, remove the tape carefully no later than 24 hours after you've poured.

AND VOILA! Your masterpiece is ready!!

And there you have it!

7 easy steps for a perfect ArtResin pour!

Do you have any tips or tricks that have worked for you?
We'd love to hear in the comments below!!